G83 will not post on generic lathe default post

[cpulido1]

Hell there I am wondering how to turn on the G83 i checked the control defination and all the canned cycles are checked, here is the post i am recieve, and if I use a mill turn post it post a G74, I am using just a regular 2 axis slant bed lathe and I dont want to sift thru all the past post processors, it worked before but now it is gone, thanks in advance.

Chris

Here is what is being posted!

 

 

 

(TOOL - 6 OFFSET - 6)

(LTR.J DRILL)

( PRE DRILL FOR .285 DIAMETER )

G28 G54 G0 T0606

G97 S750 M03

G0 X0. Z.1

CUSTOMIZABLE DRILL CYCLE X0. Z.1

G28 U0. W0. M05

T0600

M30

[crazy^millman]

Your dealer will be of great help give them a shout.

 

Welcome to the forum.

[cpulido1]

I needed it asap and since it is the holidays and everyone else is on holiday vacation, that don't help, but thanks, for the input!

[crazy^millman]

Well problem is you have provided such little information hard to help you. I do not see a .z2g or a sample file attached so hard to know what you are doing. Guessing you picked the wrong drill cycle.

[Guest]

a search on this topic would be helpful as I and a few others have shown this exact post edit many times

[cpulido1]

So I got the g83 to post now but no "Z" or "Q" value this is for the lathe here is the string in the post and no G80 to cancel!

 

ldrill$ #Canned drill cycle, lathe

pdrlcommonb

pcan1, pbld, n$, *sgdrlref,*sgdrill, pgdrlout, pzout, pxout, pyout,

prdrlout, dwell$, pffr, strcantext, e$

pcom_movea

pcanceldcl

 

 

(TOOL - 6 OFFSET - 6)

(LTR.J DRILL)

( PRE DRILL FOR .285 DIAMETER )

G28 G54 G0 T0606

G97 S750 M03

G0 X0. Z.1

G83 R.1 F.002

G28 U0. W0. M05

T0600

M30

%

[K2csq7]

So I got the g83 to post now but no "Z" or "Q" value this is for the lathe here is the string in the post and no G80 to cancel!

 

ldrill$ #Canned drill cycle, lathe

pdrlcommonb

pcan1, pbld, n$, *sgdrlref,*sgdrill, pgdrlout, pzout, pxout, pyout,<<<<<<<<<<<<<<<<<< on this line, change the pzout to pfzout..... that should force Z output

prdrlout, dwell$, pffr, strcantext, e$

pcom_movea

pcanceldcl <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< I think this should be pcanceldc *********** or pcanceldc$

 

 

(TOOL - 6 OFFSET - 6)

(LTR.J DRILL)

( PRE DRILL FOR .285 DIAMETER )

G28 G54 G0 T0606

G97 S750 M03

G0 X0. Z.1

G83 R.1 F.002

G28 U0. W0. M05

T0600

M30

%