MILL.SET File

[AlbertZini]

Hello everyone !

Is it possible to do? pictures with the views automatically were inserted into the. doc file

[crazy^millman]

With Mill.Set I would say not possible would need to something else were you take an other software and then piece together.

[hlibhlib]

Cut.

[hlibhlib]

Help me Fix the error of an output of work feedrate : --

If to create several operations : <counter F200.>, <counter F200.>, then <POCKET F180.>, and then again <counter F200.>, <counter F200.> all on one tool, we will see that work feedrate of the counter is displaced on a POCKET, and from a POCKET on the following counter.

 

Excuse for my English.

 

[rocheey1]

do you have any manual ops in there? I seem to remember having to workaround something very similar to this when I parsed the results of the mill.set file.

[hlibhlib]

do you have any manual ops in there? I seem to remember having to workaround something very similar to this when I parsed the results of the mill.set file.

It is a standard file. Your file broken too.

It is pleasant to me, and as required it should be edited.

The request still to be actual. :help:

 

 

:help: http://www.emasterca...60 :help: