3d scallop error

[t smith]

I have a solid mold I am 3d scalloping and when i

run the scallop I get an error All Boundaries of

a surface degenerate (it will not be fixed).

press to continue. The bad part is this is the third toolpath I used the same solid to

do. I am sorry I can not put the part on the FTP

site

Thank you for any help

Tom

[Fig sign]

You have masking turned on .

Turn it of and make regen .

 

Yuk !

[t smith]

No I don't. I shut down Mastercam and I shut down

my computer and it fixed it's self!

Thanks for the help.

Tom

[Fig sign]

Tom!

This is a common thing for masking on .

Try it once and you will see .

I trust your words ,but I think it was masking .

I work with ver 9.1 from the start and never saw this message ,except masking .

But it is nice to know that you O.K

[t smith]

Iskander teh

I don't doubt you.

I just thought it was goofie that it did it on

the third toolpath.

Thanks for your help

Tom