Multiaxis Strategy Window Cut Off

[@Mastercam]

Hello Everyone, 

I'm using multiaxis Strategy but window gets cut off   

Is there any solution? 

[crazy^millman]

Change you resolution. What is your current Graphics set to, the other option is hook the laptop up to an external screen with better resolution and program from that. I use 3 27 ASUS monitors from my Dell 7400 laptop with the WD19TB adapter with no issues. I am content with 1980 x 1040 no need for 4K with running Mastercam, SpaceClaim, Vericut, NCSIMUL, CAMplete, and other software I use. My laptop is for work only no games on it. I have an IPAD for that when I feel like playing a game. 

[@Mastercam]

I agree with External Screen Setup.

But this issue only with  Mastercam 2017/2018/2019/2020 Multiaxis strategy other window looks good 2D Mill, 3D Mill, Mill-Turn, Wire-Cut, Router......

Laptop - ASUS STRIX ( Republic Of Gamers ) 

[Chally72]

Hi Sushant- If your laptop maximum screen resolution is low, there will be numerous dialogs like this that you cannot fully see. As Ron suggested, hooking up to an external 1080p monitor is the best choice in this case.

[@Mastercam]

Thank you! Chally & Ron for the valuable feedback.