Middle Mouse Wheel

[215]

When i press my Middle Mouse Wheel to rotate my Geometry,  all of my wireframe geometry disappears until i release the button,  but it is only doing it on one particular file.  When i open up a different file,   it does not do this.  Does anyone know what causes this?

[sir Camalot]

In Configuration, View Settings....check: Number of entities for dynamic rotation. Mine is set to 1000000, but my graphics card can handle it. Depending on the number of entities that are showing, they could be just disappearing when you try to rotate.

[Chris In-House Solutions]

Integrated GPU or out of date graphics drivers.  If you have a good graphics card you should be able to force the PC/GPU to be setup when you are using the software to use the graphics card.  Good cards will also allow you modify a few settings that can make a difference in performance of the software too.  

[Colin Gilchrist]

On ‎7‎/‎14‎/‎2020 at 12:36 PM, sir Camalot said:

In Configuration, View Settings....check: Number of entities for dynamic rotation. Mine is set to 1000000, but my graphics card can handle it. Depending on the number of entities that are showing, they could be just disappearing when you try to rotate.

Setting '0' will allow an unlimited number of entities for Dynamic, but it does tax the graphics card with the more entities that you have visible...