Wissner gamma 202

[verdoes]

Hi,

One of my apprentice wants to try to get an older (like new) Wissner Gamma 202  5 axis to work.

But he is unable to find Wissner  gamma 202  5 axis POST PROCESSORS,

We have a license for HSM works , and work with Solidworks 2018.
As we are a small prototype shop , we have no founding to buy  direct from Wissner  as the charge  vary high  prices ,
any help is welcom,

thx

Ton

[JParis]

Not sure why you're looking for an HSM post on a Mastercam website...

Expect to pay for a 5 axis

[verdoes]

1 minute ago, JParis said:

Not sure why you're looking for an HSM post on a Mastercam website...

Expect to pay for a 5 axis

Can be Mastercam  as well

[JParis]

Then contact your reseller..

asking for a post here is not allowed

[verdoes]

ok thx

[gcode]

HSM Works is owned by AutoDesk now and you will probably have to go to them to

get a post for HSM Works

They will probably make you buy a subscription to Fusion or something current before they will help you

Both this website IHS Posts and  Postabilty build excellent Mastercam posts and I suspect it 

would less expensive that the AD route