BUG: "Select all advanced" quick selection button selects wrong entities

[evugar]

Hi!

Mastercam Version 24.0.19884.0

In the example part below after entering "Toolpath Hole definition" dialog I check "Wireframe->Arcs" and "Diameter=8.0" in "Select all" quick mask dialog. But besides correct geometry this selects things that have wrong entity types and even wrong diameter.

Thoughts?

Thanks

[So not a Guru]

Uncheck "Entities". Click on "Miscellaneous" and define the diameter.

[evugar]

Doesn't help, still the same behaviour.  It DOES  help to select "Depth=0", but I still think that this is a bug.

[JMattison]

This is definitely a defect. Since you are only after the wireframe arcs, I would suggest using the Mask on Arc option in the Toolpath Hole Definition panel. Another option is to use the Select Only quick mask instead of Select All. That one seems to work fine.

Edited September 21, 2021 by JMattison
Additional information discovered.