drill cycle g83 needed

[tnscott]

Can someone tell me how to get my  lathe drill cycle to read  G83 Z-1. Q.125 R.05 F.005? 

I have a Haas and I'm using the lathe default post on mc2017.

I ALWAYS GET :

G20
(TOOL - 2 OFFSET - 2)
(CENTER DRILL - .5 DIA.)
G0 T202
G18
G97 S1000 M03
G0 G54 X0. Z.25 M8
CUSTOMIZABLE DRILL CYCLE  X0. Y0. Z-.153
M9
G28 U0. V0. W0. M05
T2500
M01
(TOOL - 27 OFFSET - 27)
(DRILL 1. DIA.)
G0 T2727
G18
G97 S500 M03
G0 G54 X0. Z.25 M8
CUSTOMIZABLE DRILL CYCLE  X0. Y0. Z-.787
M9
G28 U0. V0. W0. M05
T2700
M01

[crazy^millman]

Do a search we covered this in the last 8-10 months is memory serves me correct.

[Colin Gilchrist]

Pick the correct Drill Cycle in the Operation. You're using one of the cycles which isn't defined...