Model dose not chance color when selected.

[utsav]

Hello MasterCAM community, 

I am relatively new in Mastercam and I have just been playing with the software with the help of some online tutorials. I cant seem to get a highlight on the part or edges or surfaces when selected so I am having a hard time knowing what I have actually selected. I tried going into configurations and checked 'Use Glow highlighting' but it didn't work. I also tried Clear all option under Model Prep < Color but that also dose not seem to work. 

 

Please let me know if there is a solution to this problem on Mastercam 2022. 

Thank you 

[#Rekd™]

Model Prep Change face.

[utsav]

I just did that and It did not work. 

[#Rekd™]

Post the file so I can try something.

[Alien]

Check if "Allow preselection" selected in configuration.

And may be check color for selection geometry. 

Good luck!

Sincerely,

Michael.

[utsav]

Yep that works thankyou.