boring bars for HSK100 universal trunnion

[lowcountrycamo]

I am geting prepped to program my first mill/turn on an Okuma mu6300.  This mill has the turning feature.  I have a postability post.  What I would like to know is how are you guys holding solid boring bars?  Heat shrink, hydraulic, set screw.   I have to bore .778 ID so I thought about using a solid carb shank insert boring bar.

Thanks,

steve 

[crazy^millman]

1 hour ago, lowcountrycamo said:

I am geting prepped to program my first mill/turn on an Okuma mu6300.  This mill has the turning feature.  I have a postability post.  What I would like to know is how are you guys holding solid boring bars?  Heat shrink, hydraulic, set screw.   I have to bore .778 ID so I thought about using a solid carb shank insert boring bar.

Thanks,

steve 

Integrated shanks that go right into the HSK100 with no issues. Shoot me an email and I will send you a Library for a DMU80. I have a lot of different CAPTO tools built. Here is one to get 16" deep in a part.

 

Edited September 21, 2022 by crazy^millman
Pictures removed to add space

[lowcountrycamo]

Email  sent.  Thanks Ron