A-axis output will not output Min depth

[bird2010]

Sorry  my bad english ....i use google translate

A-axis output will not output  Min depth. but use toolpath transform to rotate can output Min depth.

How to make A-axis output also output Min depth ?

thank you all...

 

[bird2010]

I solved the problem. thank you all

[crazy^millman]

44 minutes ago, bird2010 said:

I solved the problem. thank you all

You are quite welcome since you expected someone without a sample file or sample code to read your mind and understand you then you got the helped you asked for.

Great job doing what many of have done for many years!!!!!

We have done just that figured it out. Difference is many of us on the this forum share what we learn to pass it on to others.

Since you really cared about helping others and sharing your solution to the problem like so many others who post and go do then we really appreciate you being a given part of the forum and not a taking part of the forum that so many post and go people are.

Have a great weekend.

[bird2010]

Sorry  my bad english...

the...#.....solved my  problem !

thank you all

[crazy^millman]

30 minutes ago, bird2010 said:

Sorry  my bad english...

the...#.....solved my  problem !

thank you all

Thank you for posting up the problem and the solution. Hopefully if someone runs into the same problem they will get help from your effort.