Mcam Lathe Crashes immediately when opening "chuck settings"

[Bill McMahon]

Mastercam Crashes immediately when opening "chuck settings". It's never done this before, but I did just install the 3rd update.

Does anyone know which folder I need to find or move so I can define my chuck jaws without crashing the program? Stock settings works fine.

Thanks,

-Bill 

[nleo22]

I just figured out. Open your computer management, go to Device Manager, then open tab display adapters.

Method 1;

IF YOU SEE TWO GRAPHICS CARD ARE RUNNING, THAN YOU GOT DISABLE ONE or the Other.

Also try to figure out which graphic work for you.

BOTH CAN'T RUN together it fighting with each other.

Let me know if this solve at your end.

[crazy^millman]

Look to give Mastercam 20XX admin rights in Program Files.

[nleo22]

Methods 2: why my mastercam still working with two graphics are running.

Because your Nvidia latest newest version auto updated not stable. Uninstall then reinstall with the previous Old version that are stable. If you can't find old version AT NVIDIA WEB. Well go to your pc/laptop brand provider, go to their website support then install the stable version. I have dell as you picture below.

After reinstalled stable version of Nvidia card that you have. Follow my picture below, to setup Nvidia settings.