2024 Stock Model display from Simulator

[kunfuzed]

Just jumped from 2021 to 2024.  Selecting stock for Verify in the Simulator Options is a little different.  I got my Stock Model selected and verified correctly, but now I can't turn off it being displayed on the screen.  Normally a stock model I can "turn on or off" by hitting "Alt-T". 

[crazy^millman]

This one thing is the biggest let downs for me for 2024. The process is clunky and unrefined. Give us back the better more efficient process and method we had. Need to dumb down the software for the masses then okay give advanced users ways to keep using the software to earn a living. Having more cumbersome methods that are meant to force everyone in a predetermined direction like MT looks to be the new mind set in Software development. AI is main driving force behind all of this reduction and limiting of the software. Take the other extremely bad decision with going to only Unified. That required the development of a strategy manager that Roger Peterson from Prototek (You are missed) came up with years ago to allow anyone using Unified to now have the ability to keep specific method for using Morph Between 2 curves, Parallel or other settings that were broken out and set how you needed them that got lost when Unified was thrown at us without any good method to implement it, This along with the train wreck that was and still is the new Tool Path Manager process. Throw it out there and hope the end users will still want to be still part of the experiment that is Mastercam.

[MrFish]

On 8/12/2023 at 9:29 AM, kunfuzed said:

Just jumped from 2021 to 2024.  Selecting stock for Verify in the Simulator Options is a little different.  I got my Stock Model selected and verified correctly, but now I can't turn off it being displayed on the screen.  Normally a stock model I can "turn on or off" by hitting "Alt-T". 

use this wavy line icon to toggle the stock model display along with the Alt-T to show/hide tool paths. But there is a bug with the config file , display, toolpaths box not staying ticked, this is logged.