Toggle display on selected operations button

[Sam1]

Hello all

I am having issues with Toggle display on selected operations button as shown in picture, basically not showing toolpath, any suggestions will be appreciated.

Thank you

[Jobnt]

Is it only one toolpath? Try backplotting that toolpath and see if it's really there. 

Several times in the last year I've had operations that looked clean (and had actual size) but there is not a toolpath on the screen, in backplot nor in the NC file.

Used to be when a "clean" toolpath was non-existent it would show as zero KP in the ops manager. Now it doesn't.

 

[RonC.]

Try keyboard alt-t

make sure you click in mastercam s back screen 1st.

then alt-T