STOCK PROBLEM

[mirek1017]

Hello All

I am create my stock   from  stl .file and when I am veryfy  looks like stock is empty inside ,how I can fix this ?

thank you 

 

 

[Murdock]

Following, because I just came here to ask pretty much the same question. I have a model that imports as all surfaces. I was able to turn one area of the part into a closed solid body, using the solids from surfaces function, but the others are still open sheet solids. And if you think Mcam verify looks a little weird, you should see what Vericut does with that....

[mirek1017]

58 minutes ago, Murdock said:

Following, because I just came here to ask pretty much the same question. I have a model that imports as all surfaces. I was able to turn one area of the part into a closed solid body, using the solids from surfaces function, but the others are still open sheet solids. And if you think Mcam verify looks a little weird, you should see what Vericut does with that....

I am try my stsl  one more time and rename and work now 

Just now, mirek1017 said:

I am try my stsl  one more time and rename and work now 

[crazy^millman]

Need to do the pmesh wash as we call it. Save the stock model to a level and then pick that pmesh as the model with no source operations and then it should be water tight and not hollow.

[mirek1017]

I  am use solid from level 1 and mastercam shows  solid what I am not selected 

 

 

[mirek1017]

On 10/27/2023 at 11:52 AM, crazy^millman said:

Need to do the pmesh wash as we call it. Save the stock model to a level and then pick that pmesh as the model with no source operations and then it should be water tight and not hollow.

 

"pmesh wash as we call"

What you  mean  Ron with this ? I am save my stl file on level and I want use for my stock and I have the same problem 

 

 

 

 

 

 

[mirek1017]

OK I think I got this