lathe question

[mirek1017]

I am start programing lathe year ago ,When I drilling I like use  feed per inch 

today may operator do not catch in the program ,the after drilling mastercam not posting  G99  ,there is some setting  so I can get on the  get me G99 after tool change when I use lathe operation .

Thank you  

[AHarrison1]

From  what I can see G99/G98 are triggered from within the parameter page of the toolpath.

I believe the choices are there to give users control of output without having to change configurations or definitions

[mirek1017]

13 minutes ago, AHarrison1 said:

From  what I can see G99/G98 are triggered from within the parameter page of the toolpath.

I believe the choices are there to give users control of output without having to change configurations or definitions

Yes ,but I thought  after when I use this setting for drilling  I am use turning operation mastercam will go to  beck to G99,  is not

Just now, mirek1017 said:

Yes ,but I thought  after when I use this setting for drilling  I am use turning operation mastercam will go to  beck to G99,  is not

I am mill person least 15 years  so I like drilling on lathe with feed per inch 

[AHarrison1]

This might be a post issue, mine posts out what I have set for both drilling and turning.

[mirek1017]

16 minutes ago, AHarrison1 said:

This might be a post issue, mine posts out what I have set for both drilling and turning.

I will try call me reseller