Why won't trim (or extend) warn if toolpath association will be lost?

[SlaveCam]

Another one is, if an operation is inside a subgroup, you won't notice that something has become dirty until you expand the toolpath group, only after which the icon turns to red X.

Simple things like these should be at the highest priority in the evergrowing list of bugs to be fixed...

[crazy^millman]

14 hours ago, SlaveCam said:

Another one is, if an operation is inside a subgroup, you won't notice that something has become dirty until you expand the toolpath group, only after which the icon turns to red X.

Simple things like these should be at the highest priority in the evergrowing list of bugs to be fixed...

Same with push pull and move in Model Prep if tool paths are made to a dumb solid.