solid hole selection

[mirek1017]

Hello All ,how I can pick up holes only on my blue face ,when I use ctrl shift  mastercam pick up all the same holes on on my front face what I am working  and on the back face .

thanks for any helps 

[AHarrison1]

I think Ctrl+Shift+click for holes on the same vector will be your solution.

[mirek1017]

6 minutes ago, AHarrison1 said:

I think Ctrl+Shift+click for holes on the same vector will be your solution.

tank you  for your  reply ,when I use this option pick up all holes like on the picture 

[AHarrison1]

2 hours ago, mirek1017 said:

tank you  for your  reply ,when I use this option pick up all holes like on the picture 

For me it picks the holes in the same direction

[mirek1017]

1 minute ago, AHarrison1 said:

For me it picks the holes in the same direction

What about this  setting 

 

 

[bird2010]

There is a misjudgment problem when using Ctrl+Shift+clic for hollow solids...unless you are willing to split the solids!
When this problem occurs when using Ctrl+Shift+clic, I will not cancel or reselect, but directly use the mouse window to select the unnecessary holes (it may take 2 times, because the first time will select all the holes in the range, the second time It takes 2 times to cancel all holes)
I'm used to doing it this way...I also want to know other good ways!?

 

[AHarrison1]

My settings are the same as what you have shown.

[mirek1017]

40 minutes ago, AHarrison1 said:

My settings are the same as what you have shown.

Are use 2024 ?

[AHarrison1]

2 minutes ago, mirek1017 said:

Are use 2024 ?

yes