Setup Sheet, need information to start on next page.

[JB7280]

Does anyone know how I can get the Operation section to start on the next page?  I tried adding a PageBreak in between Setup Comments, and Operations, but when I do that, it wants to output a whole blank page.  

 

[nperry]

JB - I know I struggled with this in the past and if I remember correctly it had something to do with the boxes in the lower section of the docked panel on the right.

In the graphical section of active reports designer if you click the word "detail" it'll highlight that bar blue, then look at the menu to the bottom right. I could swear it was something in "behavior". Maybe try fiddling with the option "Keep Together".

[JB7280]

16 minutes ago, nperry said:

JB - I know I struggled with this in the past and if I remember correctly it had something to do with the boxes in the lower section of the docked panel on the right.

In the graphical section of active reports designer if you click the word "detail" it'll highlight that bar blue, then look at the menu to the bottom right. I could swear it was something in "behavior". Maybe try fiddling with the option "Keep Together".

Thanks for the suggestion.  That was already set to True, and unfortunately, didn't seem to have any effect one way or the other.  

[nperry]

8 minutes ago, JB7280 said:

Thanks for the suggestion.  That was already set to True, and unfortunately, didn't seem to have any effect one way or the other.  

Got it. So it's been a while since I've messed with it in great depth, but your setup comments box, could you just make that vertically longer to force the beginning of your operation list to start on a new page?

[JB7280]

35 minutes ago, nperry said:

Got it. So it's been a while since I've messed with it in great depth, but your setup comments box, could you just make that vertically longer to force the beginning of your operation list to start on a new page?

Looks like I got it.  I had tried that, but it wasn't working, initially.  Looks like I had to make the whole "grid" area bigger, THEN increase the vertical length of that text box.  Thank you for the help.  

[cruzila]

Just move the box down a little on that page.

 

edit: it is a bit of a PITA