Application errors

[rchipper]

I have been getting these and other Application Errors while in Mastercam, at this point no other programs are getting these. It shuts me down when they pop up. Any idea what may be causing this? I did reach out to

our reseller and they are not familiar with them. It's pretty frustrating and I am hoping this is not an underlying issue that could wind up being pretty bad.

I searched the internet but I'm not real certain what I am looking at, I'm not a applicationscomputer guy by any means

Thanks in advance for any input.

[gcode]

Thought #1

are you running One Drive on this PC?

Thought #2

Both of these errors are Adobe Acrobat errors

It's pretty weird they should be popping up during a Mastercam session

Do you have Acrobat open??

 

 

[byte]

3 minutes ago, gcode said:

Thought #1

are you running One Drive on this PC?

Thought #2

Both of these errors are Adobe Acrobat errors

It's pretty weird they should be popping up during a Mastercam session

Do you have Acrobat open??

 

 

It's likely related to setup sheets that use a pdf reader,

Here is a link to a thread on adobe about solving this,

Solved: Acromissingcompwclass: AcroRD32.exe Application er... - Adobe Community - 8849028

You could also try changing the default program for opening pdfs

[cruzila]

Backing up a bit. What was done in the few seconds prior to this error?

[SuperHoneyBadger]

I used to get a similar error (can't be sure of the exact numbers) often, specifically when closing MC2023 on my machine. It never seemed to be an issue other than having to click to close the error, no data loss or problems. It did say MasterCam in the dialogue box title for me. If I can replicate, I'll add a screenshot.

Pursuant to the other responses, I no longer use Adobe Acrobat Reader, so maybe that was the issue. Not sure. I have not had the error since moving to MC2024 and Foxit Reader.