NAKAMURA TOME AS-200L PART CATCHER PROBLEM

[Tamir Alon]

Hi there 

Hello everyone!
I recently upgraded to a NAKAMURA TOME AS-200L two-spindle mill-turn

Mastercam's post for the machine is excellent, but at the moment I have not yet found the option of using a part catcher.

Do I have to enter the code manually?? Or is there a relevant icon?

Would appreciate help!!

[JParis]

I'm not familiar with that post...might there be a Canned Text option or  a Misc Int/Misc Real option for it?

Short of those, it may have to be added to the post

[Tamir Alon]

Thanks  @JParis 

There is no option for Canned Text option or  a Misc Int/Misc ... on this post.

I guess i will have to ask for special of my dealer.

[riverhunter]

8 hours ago, Tamir Alon said:

Hi there 

Hello everyone!
I recently upgraded to a NAKAMURA TOME AS-200L two-spindle mill-turn

Mastercam's post for the machine is excellent, but at the moment I have not yet found the option of using a part catcher.

Do I have to enter the code manually?? Or is there a relevant icon?

Would appreciate help!!

We recently purchased our third AS-200L.  and use a older MP post.  who did you purchase the post from ?  We would like to purchase a good post for this machine. ( our local reseller isn't of much use.