Despertly need fanuc post

[Julian123]

My distrubitor is on vacation and I'm in trouble. The machine we intended to put the job on is down so we have to outsource a lathe operation.

 

Does anybody have a post for a fanuc that uses I & K instead of R's for corner radi?

 

I'm using version 9 lathe in the 2-D package and need to repost teh job for a fanuc that doesn't use R to go around corners.

 

If you can help please email me at

 

[email protected]

 

If there's a location where I can find it please let me know I'm new to the group.

[Roger Martin from CNC Software]

Julian123,

 

Most likey the post you have contains a switch to allow for setting the arc format.

Look in PST file for this ->

 

arcoutput : 1 #0 = IJK, 1 = R no sign, 2 = R signed neg. over 180

 

and set it to -> arcoutput : 0

[Brendan P]

I think you might be want to re-phrase your question to: "can anyone help me modify the mplfan post."

 

Asking for a post can get you in hot water around here!

 

Welcome to the forum

[JS]

Julian where in Florida are you.

 

Joe Ft Laud.

[crazy^millman]

I am thinking Jacksonville. Might be the one I know there if so this is Ron Branch how things going if not sorry about that.