chook

[bob frederick]

Has anyone run into the problem of gernerating an error when running a vericut chook in Mastercam? When I run vericut dll chook, I error out with mill9 has generated errors and is being shut down by windows. Any suggestions Thanks

[bobbyjack]

I have the same problem, what makes it baffeling is that we're using Vericut (and Mastercam) on 2 different machines with the same software, both on network licenses. One works fine and the other crashes. I'm working the problem with Vericut as we speak, if I find out anything I'll let you know.

[bob frederick]

Thanks I,ve been debugging the software to determine the location of the application exception. Thanks

[bobbyjack]

Are you working with Vericut on this? What are they telling you? I think that they are holding out until 5.4.1 ships to see if that fixes it.

[Hardmill]

quote:

---

I have the same problem, what makes it baffeling is that we're using Vericut (and Mastercam) on 2 different machines with the same software, both on network licenses.

---

I've seen this problem before, we resolved the problem

by loading the network license on one of the PCs rather

than on the network.

That PC will need to be on for the license to be

active but it cured our problems.

Keep us posted to let us know how it goes.

 

PEACE

[bob frederick]

I just received a message from Gene at Vericut and they are trying to duplicate the problem with windows 2000. We run one computer with the license server on the one computer. I have a backup that I loaded vericut and mastercam and it works fine. It's a 2000 computer. They informed us that there are several customers that

are experiencing this same problem and only with

2000. So we will give them time to look at the problem and maybe come up with a solution. Thanks guys for your input. It is great that we can do this. Bob Frederick

[bob frederick]

I just received a message from Gene at Vericut and they are trying to duplicate the problem with windows 2000. We run one computer with the license server on the one computer. I have a backup that I loaded vericut and mastercam and it works fine. It's a 2000 computer. They informed us that there are several customers that

are experiencing this same problem and only with

2000. So we will give them time to look at the problem and maybe come up with a solution. Thanks guys for your input. It is great that we can do this. Bob Frederick

[bobbyjack]

If you haven't fixed it already try updating your Windows 2000 with all the current updates. It seems to have fixed our problems.

[bob frederick]

I found that out when I updated ours. Thanks for the replies. Good Job