Huroc 4 -axis Ultimax 3

[JoeB]

Hullo

 

We are trying to run mpfan on our rotary axis and the rotary seems to be indexing instead of true simultaneous motion - does anybody know if a specific m or g code needs to be included at the beginning of the motion - here is a snippet of code

 

T1 M6

G0 G90 G54 X-11.9261 Y-.9061 A7.692 S3259 M3

G43 H1 Z5.7957

Z1.8957

G1 X-12.0254 Y-.8947 Z1.8955 F12.

X-12.0253 Y-.8923 Z1.8965 A7.74 F12.

X-11.926 Y-.904

G0 Z2.0465

X-11.6349 Y-.9227 Z2.0387 A7.322

Z1.8887

G1 X-11.5353 Y-.9133 Z1.8877

X-11.5354 Y-.9105 Z1.8889 A7.378 F12.

[Fred @ Slate Industries]

(M32 Clamp A axis)

"The clamp A axis code clamps the A axis.

For A axis moves after M32,The A axis automatically unclamps and clamps after the move is made.

(M33 Unclamps untill a M32 is programmed)

M33 is active before the other commands

in the block are executed and is cancelled

by a clamp A axis (M32) command

 

HTH

[ak762]

After look at your code I think for true simultaneous motion A axis code must be at every block. I believe problem comes from post or toolpath strategy