Karlo, if BE so sweet, may be enlighten when bullnose tool will be support http://www.emastercam.com/board/index.php?showtopic=66368&view=findpost&p=766507

Perhaps I am wrong but if I correct understand 5 axis strategy depends from machine configuration and hence depends from postprocessor. Normally such posts are SIM/HASP locked I am wondering, will you going to provide such data?

quote: Esprit is good but not like the candy-coating hes putting on it. He really knows a little(very little) about alot. Thats it. I expected you guys will add own comment to him blogs perhaps JB simple can not see your thought

I'm not offended as he calls me, I appreciate his review because he lifts the curtain on the hidden side of the applications.

pros and cons by skilled guy here http://jonbanquer.wordpress.com/dp-technol...s-mastercam-x4/ and for everybody at emastercam community was given a name quote: clique idiots / fanboys on the e-Mastercamhttp://jonbanquer.wordpress.com/cnc-softwa...astercams-code/ will be glad to read some comments at his blog after

there is a good sample shared by JMP at ftp Mastercam_forum/X3_Files/TEST -707_JMP.MCX

What's about -> support file save/load at misc tab?

quote: Can somebody recommend me a software that can do backplot lathe?you can look at application from Russia http://www.ncmanager.com/index.html

When I worked with A2100 we run tool change block T1 M6 O1 O word - Tool Length/Diameter Compensation O number was same as T number never got alarm "machine cannot move up " quote: the machine actually makes a 3-axis simultaneous linear move in the direction and amount of the offset (from H0), instead of simply modifying the current coordinate display.you can try to use G92.* instead H Have you a operator/programming manuals? there are a good explanation how to use and combining several offsets http://websystem.gismo.se/gismo/files/859/...NG%20MANUAL.pdf

Watcher, same as your link in live

google translation in English: Hey all you who are looking for CAD work, If you have any of the following experiences: - PDMS - MicroStation - Inventor - SolidWorks or experience of CAD Engineering and if you want to work in Norway or Sweden, please visit our our website

quote: I found what to add, but do not know where to put the postblock ptool_insp at Should it go in with/after/before the above code I pasted in?. If I correct remember any place in post start near from logic if rpd_typ$ = 7, ptool_insp for easy edit after

there are limited next variables that allow to get data one step beyond of current state if you suppose next_fr vice versa prv_fr then you are wrong you should read MP Reference Guide before work around

quote: I think what your saying is to save the NCI line to variables like prvx, prvy, etc then run the next line and output prvx and prvy on that line?it is similar as look ahead at one step of next move you will find description in MP postprocesor reference guide it my favorite approach when I try to catch next x y z movement for special purpose

quote: Is there a way to retrieve next line information from the NCI without using buffers?.There is alternative way use variables start from next (nextx, nexty, ...)