Plot

[Andy]

Interesting,

Lathe has the ability to create a toolbar button called: Screen/Plot

Mill does not!

I was unable to record a Macro for the same task.

Andy

------------------

Gordon Engineering

Eureka, Ca.

V8 Lathe and Mill

[CycleTimeCharles]

My Mill v8.1.1 has the ability to create a toolbar button called: Screen/Plot

[Andy]

I have 8.1.1 also.

In config buttons there are no choices between Screen Repaint

Screen Statistics

Very strange. Must be missing something!

Andy

------------------

Gordon Engineering

Eureka, Ca.

V8 Lathe and Mill

[CycleTimeCharles]

It is between Screen-Grid and Screen-Regenerate

[Andy]

Well thats interesting, in my list there is nothing between screen-grid and screen regenerate in the list. How can that be?

We are looking in screen/configure/buttons/ aren't we?

 

Andy

------------------

Gordon Engineering

Eureka, Ca.

V8 Lathe and Mill

[This message has been edited by Andy (edited 07-15-2001).]

[CycleTimeCharles]

Here is my Screen config dialog box.

ftp://[email protected]/Masterca...creenconfig.jpg

Otherwise just edit the mill8.cfg and add the word "plot" to the button number.

2482. (B182) assignment? plot

[This message has been edited by CycleTimeCharles (edited 07-16-2001).]

[Andy]

Cycle,

What is the password again.

I thought it was forum.

Didn't work.

Thanks

[Andy]

I manually edited the mill8.cfg with plot and it worked fine. However I sure would like to know why there is no

"plot unassigned" on the list. But I am happy now.

------------------

Gordon Engineering

Eureka, Ca.

V8 Lathe and Mill