renaming nci names

[JAMES GABEL]

I like it. I will play with it later.

[Günther Massimo - GMCCS]

Small addition to chgnci.dll.

 

Now you can also apply only selected operations.

See pic above.

[Bruce Caulley]

Gismo,

Thats excellent, but if I select the 10th through to 20th operation groups and start my sequence at 5000 and increments of 10, it numbers my nci's starting from 5100.

 

Bruce the nci beta tester.

[Günther Massimo - GMCCS]

How did you make your setup.

 

Should look like this.

 

Works fine on my computer.

[Bruce Caulley]

I also had the "grouped" button ticked. What I think is happening is that it is counting from the first group and not from where I selected. The first 10 operation groups start from 1000. I will e-mail you a screen shot.

 

Bruce

[mario]

It is possible to different name for first group ans second ans third group for 10 group + -

 

 

ex:

1 GROUP : 7779 C06 B

2 GROUP : 7779 C08 A

3 GROUP : 7779 C27 A

 

It's a good option for me!!!

 

Just if it is not too long for you

 

[Günther Massimo - GMCCS]

Let me think about this.

[mario]

Take your time it's not rush

 

[JAMES GABEL]

I do all my operations seperate. Each tool has it's own operation. The operation group name for T1 would be O1001. The operation group name for T2 would be O1002. I need this chook to set the nci to the group name and the prog# as the same. Everytime I pick all operations it does not do it right. It will make all prog#'s on all operations O1001 and the nci will be like O1001 on the first operation and the second operation the nci will be O1001. It is not naming the nci the same as the group name. This is when I pick all operation at the same time. It also will not alow me to do one at a time, it keeps changing the other one's that I have already changed. I really like this chook. If I am doing something wrong please help.

 

 

JAMES GABEL

[Bruce Caulley]

James,

This is how we do it also. Hooray we aren't the only ones. Only select the first operation in each group. This way you end up with a list of tools in the order that they are used.

 

As for the nci names, tick the "grouped" box and add the O to the nci name field. Put 1001 in the sequence start and 1 in seq inc and if you select your ops as above, you will get what you are asking for.

 

If you put an excel template in your chooks folder you can really tweak what info you want.

 

Bruce

[Günther Massimo - GMCCS]

@James Gabel

 

Try this setup.

[JAMES GABEL]

I can get to work the way I need it to. I will try again later.

[JAMES GABEL]

I tried it and it didn't work. I will try it again later