Windows 2000

[Jon Guck]

Anybody out there have any experience with mastercam on windows 2000?

How is it running?

Thanks.

[Bullines]

Runs great on my Windows 2000 SP2 system. I could start by preaching about the benefits of Windows 2000, but I won't. This topic has been done to death on this forum. An example thread would be http://www.emastercam.com/ubb/Forum1/HTML/000952.html . If you do a forum search for "Win2k", "Windows 2000" or "OS" you'll find many a post on the topic. Hope this helps.

[cadcam]

Trust us make the change you will be happy.

------------------

jay/ aka cadcam

Precision Programming

email: [email protected]

web: www.ppcadcam.com

[Guest CNC Apps Guy 1]

I would heartily agree with Bullines and cadcam.

------------------

James M.

Mastercam Enthusiast

[Webby]

James -

Mastercam, Meyette, & RISC

http://www.emastercam.com/ubb/Forum1/HTML/001250.html

was a repeat of another open thread:

Dual proccessor computers

http://www.emastercam.com/ubb/Forum1/HTML/001220.html

You can still reply to the latter thread, or at your request I can open up the former and let the fire fly. I do somewhat miss the essays peppered with dictionary content...

[gstephens]

Also take into consideration that CNC Software uses Windows 2000 for all of their development, so that would definitely be the prefered OS.