Rough project problem

[Storkman]

Ok. I had 0904 update installed and I tried to project a simple line toolpath down on a solid and some surfaces. It would create an operation but it was only 0.2 in size which when backplotted showed nothing. I tried everything I could think of, ie. different view, change solid to surfaces, recreate everything, and it still wouldn't work. So I removed the 0904 update and it worked fine. I am confused.

 

 

If anyone wishes to look at it. It's in the ftp under MC9 folder. storks_problem.mc9.

 

Let me know if you find something.

[Fig sign]

I will look ,Storkman .

Next time don`t forget to zip it

[Fig sign]

I prefer to use project NCI ,gives you more controle and options

[Storkman]

Oops. Sorry for the no zip Iskander. I didn't try the project nci, maybe that will work. I would have to put 0904 back on to try though.

[Henk]

Storkman,

You can better install mastercam 2 times, 1 with, and 1 without 0904, then you dont to put 0904 on and off and on and off.

 

just a thought

[Storkman]

If I can't get it to work, I will just do without. Besides X will be here soon.

 

 

teh birdy open a can of worms.