LEVEL

[RYANDUC]

HI THERE

I WOULD LIKE TO KNOW WHAT THE LEVEL 1, LEVEL 2

AND LEVEL 3 MEANS IT.I READ THE BOOK I COULD NOT

FIND IT.THANKS

[?Mark]

WHAT ???. Can't hear you

I'm assuming you "yelling" about level of MC.

Level 1 lets you create 2d toolpaths

Level 2 lets you cut one survace (with multiple check surfaces) at a time.

Level 3 lets you cut multiple surfaces (with miltiple check surfaces) at a time.

 

Regards, Mark

[CNCme]

Good Day,

 

If you hold ALT key and press V, It will

show the level of your version.??

 

 

Tony G

CNCiT Precision Machine - Hudson,NH

X Beta Site

Almost Employed Senior Programmer

N.E Massachusetts - Southern New Hampshire

_________________________________________

End mills and tooling are like The "AMMO"

And coolant and chips are like the enemy

Under your boots as you advance in the

Manufacturing Battle

--------------------------------------------------

[RYANDUC]

HI THERE

WHERE I CAN FIND THE BOOK TO TEACH YOU HOW TO

USE LEVEL 2 & LEVEL 3.THANKS

[George_Gerhard]

Ryanduc

on this site there is a section dedicated to books.

May I suggest that you should type in lower case letters.

 

rgds

George

unable to fly today

[Guest]

-------------------------------------------------

I READ THE BOOK I COULD NOT

FIND IT.THANKS

-------------------------------------------------

 

Just curious, which book?

[P_Scott]

RYANDUC,

 

You may also contact your Mastercam reseller and they will be able to clarify which books you would need. Or they will also offer training that will supply you with very useful information. HTH

[cadist]

The books that came with mastercam are very nice in my opinion. Perfection comes with more practise.