Levels Question

[George Hardwick]

I set my tool paths to always be on level 10, I cant remember how I did it nor how to remove this setting. sure it was quite simple. many thanks.

[Kannon]

Sorry George,

I didnt think you could set toolpaths to different levels

I just thought you could do that with entitys.

[George Hardwick]

That is the strange thing i've gone and done it and I cant remember how....

[Psychomill]

In V9 go,...

 

nc utilities > backplot > display

 

At the bottom of the page check the box for "Save as geometry" and select "Always". Set your level on "Save to level"

 

To undo this, go back to it the 'Display' screen, select "now", then uncheck the "Save as geometry" button.

 

You should be able to just uncheck the box, but for some reason it wouldn't always take. Then when I opened another file or reopened MC, the "save as geometry" button would be on. It wouldn't change the setting until I changed the method.

 

 

In MCX you do......

 

Well I wouldn't know since I'M STILL WAITING FOR X!!

 

[George Hardwick]

Thanks Psycomill,

Yes that was what I did I thought it would be usefull but it turned out not to be so. just forgot how iI did it