need to convert 3 UG files to MC

[ERIC14779]

I need to convert what I think are 3 UG solid files to Mastercam and keep the parts as solids.

Can someone help or must I get a translator

thanks so much

[Guest CNC Apps Guy 1]

e-mail me the files and I'll use my FREE seat of Origin that I got while it was still available, which will convert the UG files to Solid Edge files they you can read those right in to Mastercam. I can have them for you in the morning.

[ 10-17-2001: Message edited by: James Meyette ]

[ERIC14779]

they wont open on Origin I all ready tried that method

gives an error "line 838 of pfedit.c not a part file"

maybe origin wont open this version ???

[cadcam]

I have the mastecam UG conveter post one on the ftp i will tak a stab at it.

this is the Cimsoftek UG converter.

[ 10-17-2001: Message edited by: cadcam ]

[gstephens]

You can also go to This site and use their (Cimsoftek's) "Pay per use" service.

[Kenneth Potter]

FREE seat of Origin !!! That sounds like Solid Works. Sweet product !

[cadcam]

Ok all solids came in great what would you like me to do with this file sir.

With all the solid parts this file, as a MC8 is 10megs.

After zipping it ,I found it will email just fine.

So i have sent you a mail containing the file sir.

[ 10-18-2001: Message edited by: cadcam ]

[Guest CNC Apps Guy 1]

quote:

---

...they wont open on Origin....

---

Bummer.

[ERIC14779]

CadCam thanks alot !!!!!

That first file does look great.

I put the other two up on FTP under convert to MC file name ug2.zip 3 Meg

James I think that Origin may not be able to open the latest ver of UG files these are from Delphi Automotive I am sure that they are using the latest ver. of UG !!!!!

Thanks all so much for your willingness to help. Sure helps a small business be able to perform.