Cycle Time

[Balbir]

Hi

I am having backplot cycle time problem in ver_10

Why cycle time is different in mastercam 9 and 10 ?

I am using the same toolpath in milling and lathe for both version. Which cycle time to trust now?

 

I am using backplot and then Info screen in ver_10 for cycle time. Is it right or wrong?

In ver_9 we use to run backplot and then check the screen in bottom for cycle time.

 

Thanks

[rob@fain]

I'm having the same problem, the cycle times in X are much shorter,(unbelieveably short),than in Ver 9.

 

Rob

[Balbir]

Please Help.....

I am also using mastercam_X to Estimate jobs and machine cycle time.Both (Mill and lathe)is giving me wrong information.Which is different than MC9 cycle time.

 

Help Help Help

 

Thanks

[Balbir]

Sorry, here is the link to see proper image size.

 

http://img267.imageshack.us/full.php?image=mc9100yi.jpg

[Kannon]

Does this help at all? link