Translation error

[charleschia]

I have encountered umpteen times of error due to transforming operations and most of the error occurs when i'm programming the cutting of gears and pulley

When i backplot the single operation, things seem to be ok but when i backplot the transform operation, things start to go haywire such as missing one cut of the teeth be it gears or pulleys.

Has anyone encounter this type of errors?

[Flycut]

Is this the same pulley I drew up for you?

[charleschia]

Hi flycut....

Not only that......other gears also....which i have create myself.....i have encountered last time also and contacted the local agent and they just blame the whole thing on the bugs????

So the only solution i have is to transform the whole series of operation as new ones including the geometry also...

[Flycut]

If that works then it shouldn't hurt to have more geometry does it?

 

Are you using X or 9?

[charleschia]

I'm using 8.1 and 9 concurrently....more used to 8.1 ..

My company didn't purchase the x version....

By the way, is it much better?

As for the method that solve the errors, by creating more geometry and entities such as surfaces, the program will reach bottle-neck and the whole system will become very lagging......becos my work is more to prototyping and hence alot of 3D profiles so alot of entities will slow down my programming...