rotary winding

[snowman]

I have a haas vf4 with a trunion table.

Im trying to do a 5 axis toolpath but the

B axis keeps unwinding and the tool

gouges. Im using a modified generic fanuc

5 axis mill post and mastercam x.

any help is appreciated.

 

[ 01-12-2006, 09:47 AM: Message edited by: snowman ]

[Guest]

snowman,

 

have you checked this section of your post to see if the switch you need is already there.

 

quote:

---

#Force rotary axis reset at toolchange and other options

---

code:

---

frc_cinit   : 1

typ3_brk_evn : 0 #Windup limit, use even revolution break position

#Primary and/or secondary

---

[mayday]

hey snow, did you try the other post??

[snowman]

quote:

---

have you checked this section of your post to see if the switch you need is already there.

---

yes i have john and i have the same

settings as you posted.

[snowman]

quote:

---

hey snow, did you try the other post??

---

hey wes im using the mphaas_vf8_0.pst

we had but. but its a modified fanuc 5 axis post.

 

buy the way how you been bud.