MR1 HST toolpaths problem

[MIL-TFP-41]

hey all...just wondering if anyone else has run across this yet...

 

I am trying to use the new core roughing toolpath...works great..but for whatever reason it is not outputting anything from the misc values page. I have tried everything (Automatically set to post values), changing the values...yet when I go back into that operation, all the values are reset back to zero. All other toolpaths appear to work properly (contour, surface rough, ect) they do spit out the Misc values I have set.

 

Any Ideas???

[Gene Welti. CNC Software Inc.]

Hello James,

 

The post needs to be configured to use the values. If the post is not set up to use the values then entering values on the Misc. page will not do anything.

[MIL-TFP-41]

Gene,

 

As far as I know the post is set up correctly. All other toolpaths are accepting the values & outputting them into the program. The post is a modded mpgen5ax. On these toolpaths, even when I enter values it sets them back to zero when I go in and out of that particular operation.

[peter_w]

I am having the same issue trying to use Misc. values with our roders post, works fine with all other toolpaths just not the new hst toolpaths