Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.
Use your display name or email address to sign in:
Hello,
Blade Expert is a custom application that was developed specifically for impeller and other multibladed parts.
What used to take between 8-40 hours can now be done in under 4 hours.
It allows an unlimited number of splitters.
As far as some of the comments on other CAM packages.
• One of them was used as the benchmark when developing the Blade Expert product.
• The other one looks very similar to Mastercam Blade Expert.
At CNC Software we currently have 3 different five axis machines in our machine shop to test Blade Expert with.
We welcome the opportunity to demonstrate Blade Expert with your part, in your shop, cutting on your machine.
Challenge us, send us your toughest multibladed part.
Thank you,
Gene Welti
[email protected]
Corporate Sales
CNC Software, Inc.
5:10 Multithreading on
7:30 Multithreading off
Dell T5400
Xeon E5420 2.5 GHZ
3 GB RAM
XP SP3
Mastercam X4
Same machine with
Vista 64
8 GB Ram
Same times within a few percent.
Hello Steve,
Currently only CNC Software people can add to the blog. It is another resource for CNC Software to get information out to the Mastercam community.
Hello John,
There are post classes available at CNC Software see link below or go to the website.
http://www.mastercam.com/Support/Training/Default.aspx
Hello Speedtool,
You can also install Mastercam X direct for Solidworks. This will allow you to open Mastercam from within solid works. The download for this is on the Mastercam website under support.
Hello James,
The post needs to be configured to use the values. If the post is not set up to use the values then entering values on the Misc. page will not do anything.
Hello David,
The closest thing that Mastercam has is Solid/ Sweep. This allows you to pick an OD chain and an ID chain and then you can sweep it along a spline.
In Ideas I am trying to remember does it work by just entering an ID and OD in a dialog box and pick a spline that you want to create the tube along?
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.