Levels

[Riley]

How do i work the levels in Mcam8.Copy levels,and make changes without changing all levels.

[KLR]

Select SCREEN, CHG LEVELS, select the level you want to change to and make it active, then click on the geometry and it should change.

[Matt Berube at Ferron Mold]

The trick is once you COPY the stuff you want to change, turn off the rest so you don't get confused. Also if you MOVE to a new level, your existing toolpaths will stay associated to the geometry but if you COPY, the toolpaths stay associated to the original geometry. Therefore if you want your toolpath to reflect the changes you made, you'll have to reselect the toolpath geometry or create new toolpaths.

 

Welcome to the forum Riley !

[Riley]

Thanks for the help with levels.