toolpath editor ->X rashing

[Xmishu]

Hi,

I try to modify a toolpath pocket standard with TOOLPATH EDITOR.

I deleted same points and I moved a point.

At end of that when I try to save Mastercam X ...CRASH !!...." the instruction at 0x0b3d2628 referenced memory at 0xb3d2628. The memory could not be read. Click on OK to terminate the programm".

I try too with a simple pocket rectangle...same things.

 

What it's this...? A bug ?

[Xmishu]

I use Mill level 3 MR1 !

[Xmishu]

Nobody have already seen this problem ?

CNC Software ?

Forum administrator ?

[jrauch]

several different things could be happening, but once simple tasks start crashing I end up rebooting my computer and that does help and also If master cam has been open for a long time "like over the weekend" it seems to also act up sometimes, also what kind of computer setup are you running??

[Roger Martin from CNC Software]

xmisu,

 

I did a couple tests altering 2D Pocket toolpaths and had no problems.

Does this issue appear to be a part specific issue? Or does the crash when exiting the Toolpath Editor occur "doing anything"?

[Pete Rimkus from CNC Software Inc.]

I can't reproduce it either, but we did indeed fix several bugs in the TP editor after MR1.

I'm going to post an item in the Beta Testers forum to see if others can verify that this type of problem has been fixed.

[Xmishu]

JRauch,

I use a Dell Optiplex GX620, P4, 3.0 Ghz, 1GB RAM

[Pete Rimkus from CNC Software Inc.]

xmisu,

So far I got 2 "I don't have this problem with MR2 Beta" from the Beta forum.

Sounds like we cleaned it up.

[Xmishu]

Ok Pete,

I'll wait fot MR2 final !!! Thank anyway !

[?Mark]

Have the same problem with simple pocket facing (with depth cuts) while using TP editor.

Error comes up BEFORE I exit this function and MC shuts down...

Can make it happen pretty easy by deleting first entities in a toolpath...

Another reason for looking forward to mr2...