First bug in MR2?? Where are my subgroup minimise tabs?

[Bruce Caulley]

[gcode]

I'm not seeing that on my system.

The minimize box is available for all subgroups that have operations

I suspect its got something to do with the X+

chook, thoough the chook is running OK for me.

[Bruce Caulley]

Still not working. I shut down and started again. Then I created a new file with subgroups and the minimise tabs disappear?!?!?!?!?!?!?!?!?

[gcode]

try uninstalling the X+ chook

[Bruce Caulley]

I should say the maximise tabs are missing. If I minimise then the cross isn't there.

[gcode]

try a differnt font in X+

all is well on this system

[Bruce Caulley]

The tab is only visible if the red arrow of doom is in that group.

[gcode]

I would try saving your congif files in a safe place, then delete them from the config folder.

When you start X it will generate new default config files.

If that fixes it, something is wrong with your config files. If it doesn't, just put your files back.

[Ray Culver]

Try moving the red insert arrow around. It has something to do with having empty toolpath groups in the list.

[Ray Culver]

IT'S A BUG!!!

 

But don't worry - no data is lost.

 

There is a work around until we can issue a fix.

 

Saving and reloading the file will display your groups properly, or select the offending group (the one without the expand/collapse icon) and move your red insert arrow into it by pressing the button bordered in red as shown below:

 

[Ray Culver]

Just so you know, it occurs when you create a toolpath group that contains nothing but other toolpath groups and no toolpath operations.

[Bruce Caulley]

Thanks Ray. How long to fix? All our operations are set out this way.

 

Bruce

[Chris Rizzo]

I submitted this a week or so ago, it and was logged as bug cnc00020834.