post processor modifications

[Bob W.]

I would like to modify my post so that when a program ends it takes the mill to z4. x-15. y0.

 

The line I typically end with (by typing in to the machine manually) is g90 g53 z4. x-15. y0.

 

Anyone know how I would modify the post to do this? The machine is a Haas Mini Mill.

 

Thanks,

Bob

[DavidB]

Search for peof in the post,

This stands for Program End Of File.

Add

code:

---

 n, "G53 G90 Z4. X-15. Y0.(LOAD UNLOAD POSITION)", e$ 

---

The comments are an option.

[DavidB]

How did that go?

[billystein]

sounds like a good time to use home position, you can enter it in home it in the file and referance it in the post with xh,yh,zh