Toggle Toolpath Display

[ViperCNC]

When i open a part, I now get all my toolpaths displayed when it opens up. I can get rid of them by doing the ALT-T to "Toggle toolpath display for selected operations", but i dont know what i selected in the setting to make this all of a sudden start happening.

 

So what im looking for is what do i need to change to get this from happening?

 

ViperCNC

[Don S at Barefoot CNC South]

In the toolpath manager in between the lock and the ghost icons clicl that with all your tool paths checked on.

[John13]

Make sure when you do your last SAVE before closing mastercam, that all your toolaths are turned off. If they are on, it will save that way and when you open it,they will be displayed.

[Rob Peirolo CNC Software]

Viper,

Go into Settings-> Configuration-> and select the Toolpaths branch.

Uncheck the "repaint toolpaths" checkbox.

[DavidB]

+1 Rob

[ViperCNC]

Thank you Thank you, little things like that drive me nuts.

 

Thanks again for all the help eveyone.

 

ViperCNC