Net Hasp

[jpersson]

Greetings

 

We are having some problems with our net hasp server. It doesn't release licenses when the user is shutting down MasterCam. As with all good problems it doesn't happen all the time but often enough to be really annoying,restarting the net hasp service

takes care of the problem. Any ideas what it could be or where to start trouble shoot. I run the latest net hasp service and it happens on all versions of MasterCam

[Hardmill]

Do a search its been covered.

 

 

PEACE

[Hardmill]

OK, if its not letting go of the license then you prolly need

to reboot the server.

Second, is your hasp on the server or are you using a work station

as your net hasp server ??

 

PEACE

[John Giess]

Same problem here at the college. IT people will not agree it’s a problem. But my students and I know it’s a problem. The IT department just re-sets the hasp when no seats are available (not sure how they do this). We have called CNC software but no solution yet.

John

[jpersson]

Did a search and found some info, I don't really like the info I find but thats a different story.

It is currently installed on a 2003 server so that might be the problem. I don't really buy the fact that an XP machine runing processor intensive cam applications should be able to do a better job then an idling server. But it obviosly worked for other shops. At the moment I just stop and start the service and it releases the licenses. I downloaded the latest drivers from Aladdin and it been working for 2 days without a hitch. Time will tell if thats a fix or I need to migrate the sim.