MT toolpath help

[Hymen]

I'm having trouble creating a toolpath for this part. It has 4 grooves around a diameter. If anyone can help/show me the right toolplanes....ect. It would be much appreciated. One of the grooves is red and the chain is complete. One of the others the chain is broken and haven't patched it, the others I haven't looked at yet. Will do that after I get the toolpath right.

file is on the FTP.

/Mastercam_forum/MCX_Files/HELP FILE.MCX

Thanks in advance

[Reece L Gibson]

Looked at the file.

Question #1 Is this a Millturn part?

If it is, do you have a "Y" axis?

If not, what axis are you rotating about?

[Hymen]

So I don't know why I couldn't create this toolpath? I shut down and restarted and it seems to be working. But please, if you have time take a look I am always open to looking at other ways of doing things.

[Hymen]

Yes this is a millturn part. Going to run this on a Integrexx 100sy. So yes I do have a Y.

Thanks Reece

[dan m]

hymen wish i could help but i have not done anything that complex on ours yet. i would like to see the answer. i'll play with it more monday

[Q Havest]

C-axis Cross-out

[Guest CNC Apps Guy 1]

I put a file in there called HELP FILE - James. Is this what you were looking for?

[Hymen]

just back from Mexico

Thanks for the replies

[Hymen]

Whats the FTP rule?

Should I remove the file to preserve space or leave it for others to future reference.

Did a quick search for "FTP rules" and found none.