I got it thanks

We just got our new Mazak 250 MY and I am programming a G83 face drill cycle but it only pecks the 1st hole and not the rest. The code looks like. M200 M212 G0 T1111 G17 S1316 M13 G0 G54 X1.5 Z-.225 R.1 Q.1 F4.21 M210 C135. C180. C225. G80 G28 U0. V0. W0. H0. M15 M00 I have look in the manuals and can't figure out what i am missing. TIA Dan

Thanks for the reply's. Looks like we will go Royal

We just ordered a new machine and I am looking for suggestions on what collet chuck we should be looking at for it. We already talked with the sales man about this I and he suggested Royal or ATS. I am just looking for some alternitives to see if i can save the boss some money. TIA Dan

how about 5 Fadal's

Thanks Joe. Multitasking is the wording i was looking for.

My boss is going to IMTS and one of the machines he is looking for is a mill turn. I am trying to point him in the right direction as to what we need. Something like an Okuma Multis or Mazak intergrex. He keeps looking at machine with live tool holders on the turret which in my opinion for doing alot of 1 offs dont make since when i can load a magazine with the common tools we use.

Is there different wording for a mill turn where you mount the tools on the turret vs. with a magazine?

wish i was. 2 owners are going to look at mill turns and have no clue of what they are even looking at. I have to tell them what booths to go to and what to ask.

3 inch would be nice but i can live with 2 1/2

We are looking at getting our first mill turn. I have programmed and ran 5 axis (like the mazak Intergrex) and the turret style machines. We do alot of short order work. 1 to 5 pieces. I know the style machine I think we should get but I am looking for more opinions. Along with make of machine. The powers to be are treading lightly on this since I am the only one here with any experience on these machines.

This is a shot in the dark but M212 to unclamp the "C" axis. Its been a long time but I think thats what solved the problem for me.

Hi All, I am milling a contour in M3 using a 3/4 cermet endmill and it is taking forever. I am looking for speed, feed, and cutter suggestions. TIA Dan

the dynamic toolpaths worked great. thanks for all the advice.

Thanks for all the replys. I will let you know how it works out