Call all Intergrex Guru's

[crazy^millman]

When you are doing your G68 what do you use for the B axis vaule. Do you use a R vaule or a B vaule? I am using the post from In-House and I am getting a B. The guys on the machine, the examples, and the sample programs from Mazak all show R. Can you give me an example of what you are doing. Here is some smaple code:

 

code:

---

O0000 (429140-14)

(PROGRAM NAME - 429140-14 DATE=DD-MM-YY - 23-09-06 TIME=HH:MM - 14:41)

(POST LICENSE - IN-HOUSE SOLUTIONS INC.)

G20 G69 G80 G40 G17 G90 G94

M205

 

(TOOL - 20 OFFSET - 20)

(CONTOUR 1 INCH FLAT ENDMILL)

G20 G10.9 X0

N1 G91 G30 P3 X0.

N1 G30 P3 Y0. Z0.

T20 T20 M06

G91 G30 P3 Z0.

M200

G90

G97 S320 M03

M108 M212

G94 G0 G54 B90. C301.224

M107 M210

G68 X0. Y0. Z0. I0. J1. K0. R0.

G90 G43 H20 Z4.0372

G0 X-2.89 Z4.0372

Y.5354

Z3.8872

G1 Z1.4188 F20.

X-2.29 F5.

Y3.0617

X-2.89

Z1.5188 F20.

G0 Z1.6688

M9

G69

G91 G30 P3 X0.

G91 G30 P3 Z0. M05

G90

M30

---

Thanks for the help.

[kinglouie V]

on the one I programmed and ran it was B. It didn't have the "five axis" type servo, it was just position and lock in place. I don't know if

that makes a difference.

[IntegrexMan]

I have never had to do this, but in the programming book it uses an R

[Allan Brown]

Should be an R for that G68 call format. It's the rotation about Y for J1. I could see that we're not reformatting the angle call right in your post - I thought you were on G125.

[Post dept]

Looks like Mark IV to me. We haven't tested the tilted planes or setup that functionality yet. IMTS threw a little wrench into to development but we'll be back on it soon. If you've got something that works, fire it over.

 

Brett

[crazy^millman]

Let me call Glenn and see what he thinks.

 

Thanks for the replies.

[crazy^millman]

The machine is a Intergrex-E410S incase anyone has some tips or tricks they want to share I am all ears and willing to listen. I have found out that you apporach it juts like a true 5 axis machine. If you are doing 5 axis toolpaths define them that way if not it will give you a fit when posting. I will also be setting up the probing on this machine and will look to intregrate that fully with the post.