undeletable lines?

[specprogrammer]

MCX MR1 I've got two very similar electrodes I'm working on. I programmed the first one just fine. Then I brought the second electrode in on a different level. Created a new operation group. Then copy and pasted all my operations to that new group. Then applied the second electrodes geometry to the copy and pasted operations. One of my operations is a flowline toolpath. When I apply the new geometry for that toolpath the surfaces from the first electrode show up on what I thought was the new level but it turns out that it puts this geometry on EVERY level. I can't select it to delete it. I can't even analyze it. How do I get rid of these lines?

[edmBosto]

Try this;

If you are really stuck here do a file save as of the new level with the new geometry then import your toolpaths. It's just another round about way of just getting the job done. I agree it shouldn't be this way. but..

[edmBosto]

Spec, I did a typo

I had meant do a file save some not save as.

[specprogrammer]

Sorry Bosto but I had already saved after the mystery goemetry showed up now I'm stuck with it I guess

[edmBosto]

yup I guess your right

Clean up time!

[Matt Berube at Ferron Mold]

Specprogrammer,

 

Are you sure the "mystery lines" are not a stock boundary ? If this is the case they would appear to be red dashed lines and could be turned off in the stock definition area.