Siemens Post

[Post dept]

All,

 

We have been working very hard on a rewritten for X Siemens 840D post. It is supporting everything from the md/cd as our other "new" posts do.

 

Would anyone be interested in a free copy and testing it out for me?

 

If so, let me know and I'll get you setup.

 

BTW, we've come a long way on the TNC, and Makino posts as of late thanks to some great feedback. Let me know if you're interested in those as well.

 

Brett

[Zoober]

Brett, how many axis' is the 840d post?

[Mic]

Hi Brett

 

I'm very interested in trying your TNC post.

 

Best regards

Mic

[Post dept]

All,

 

This free one is a 4-axis post....based on mpmaster.

 

We have done a lot of 5-axis 840D posts as well.

 

Brett

[Zoober]

Thank you, Brett,

I would be very interested in the 840D post.

We have one (840D - 4x) that we got from our reseller, but I'd like to see how this handles the goofy stuff that Siemens can use.

[HevyMetl]

Brett,

 

I would like to try you Makino post and see how much better it works than the one I have mangled.

 

You can email me at jjoyce(at)bowlesfluidics(dot)com

 

Thanks,

[Post dept]

All,

 

Please have your resellers contact us then I'll set you up with the posts. We don't want to step on any toes.

 

840D notes - we save most of the "goofy" stuff for the 5-axis posts but this one does work quite nice!

 

Brett

 

[ 10-25-2006, 09:46 AM: Message edited by: Dave Thomson ]