Hiedinian Post TNC 426

[GREG]

Can any of you generous people out there e-mail

me a working mill post (2 or 3 axis) for the above TNC 426 control.

We have an ISO post but the M/c operators want to try using heidehain .

 

Thanks in advance

Greg Muirhead

[email protected]

 

[ 02-12-2002, 10:13 PM: Message edited by: GREG ]

[Kerry]

can i have your iso post?

 

i have a heidenhein one..not sure if it will suit you..it has thing i don't like..as i work on the same machine...but it doesn't suport my rotary table..only indexing..so not a biggy..

the cycles come out in the standard heidenhien format..while the one i work on uses alot of the q params..so some times i change the cycles..since i like the q param way better..the r valuses and things are closer to a fanuc style..where r is the absolute ref point..rather than an incremental point from the initial call position..

 

anyways if you [email protected] enough to change in the mail for me