advanced multiaxis conversion to 5axis

[xform precision creations]

I am just starting to use X2 and cannot work out how to asign the original tool path when using the conversion to 5axis in the advanced multiaxis options.

The process I have tried is select advanced multiaxis > Conversion to 5 axis > on the toolpaths to 5 axis tab select original toolpath icon. Then nothing happens.

Perhaps someone could point me in the right direction on how to use this feature. I must be overlooked something.

 

Regards

Howard Smith

[Bruce Caulley]

Howard, it doesn't work properly at the moment. QC have told me that X2 MR1 may have fixed it.

 

Bruce

[xform precision creations]

Thanks for that Bruce. Not exactly what I wanted to hear but hopefully MR1 will fix it. Do you know when MR1 is due out. I am really looking forward to these conversion to 5 axis toolpaths. They will be one of the best new features for the type of work that I do.

Howard

[Bruce Caulley]

Have you tried the contain5 chook?

[ak762]

quote:

---

it doesn't work properly at the moment. QC have told me that X2 MR1 may have fixed it.

---

I decide to look at X2 video about multiaxis

Interesting to know how they prepared this movie if it not works properly with X2 now.